Reusable PVC Epoxy Table Mold
from $30.00
Stumps Resin Molds are quick & easy & already setup for the first pour!
MATRIAL: PVC
SEAL: SILICONE
These will need resealed with Silicone after each use
Our Epoxy/Resin forms are a great investment for any shop or hobbyist looking to save time.
Sizes Available:
15" by 5" by 2.5" NO SEAL PVC Form
25" by 4.5" by 2.5" NO SEAL PVC Form
18" by 10" by 2.5" NO SEAL PVC Form
18" by 14" by 2.5" NO SEAL PVC Form
24" by 12" by 2.5" NO SEAL PVC Form
36" by 18" by 2.5" NO SEAL PVC Form
48" by 24" by 2.5" NO SEAL PVC Form
WARRANTY POLICY:
Please unscrew and tap your cured project to get it out of the form by gently hitting the inside of the sides and flipping over and hitting the bottom. Using excessive force inside on the sides and using a metal hammer will void any warranty.
Please read carefully instructions on how to mix and pour your Epoxy.
Epoxy that does not cure properly will make it impossible to remove your project.
Epoxy that over heats during the curing process will twist and crack the Form, sometimes adhering to the form. Again making it very difficult to remove your project for the form.
If any of these events are to happen warranty will be voided.
MATRIAL: PVC
SEAL: SILICONE
These will need resealed with Silicone after each use
Our Epoxy/Resin forms are a great investment for any shop or hobbyist looking to save time.
Sizes Available:
15" by 5" by 2.5" NO SEAL PVC Form
25" by 4.5" by 2.5" NO SEAL PVC Form
18" by 10" by 2.5" NO SEAL PVC Form
18" by 14" by 2.5" NO SEAL PVC Form
24" by 12" by 2.5" NO SEAL PVC Form
36" by 18" by 2.5" NO SEAL PVC Form
48" by 24" by 2.5" NO SEAL PVC Form
WARRANTY POLICY:
Please unscrew and tap your cured project to get it out of the form by gently hitting the inside of the sides and flipping over and hitting the bottom. Using excessive force inside on the sides and using a metal hammer will void any warranty.
Please read carefully instructions on how to mix and pour your Epoxy.
Epoxy that does not cure properly will make it impossible to remove your project.
Epoxy that over heats during the curing process will twist and crack the Form, sometimes adhering to the form. Again making it very difficult to remove your project for the form.
If any of these events are to happen warranty will be voided.
Mold Size:
Quantity:
Stumps Resin Molds are quick & easy & already setup for the first pour!
MATRIAL: PVC
SEAL: SILICONE
These will need resealed with Silicone after each use
Our Epoxy/Resin forms are a great investment for any shop or hobbyist looking to save time.
Sizes Available:
15" by 5" by 2.5" NO SEAL PVC Form
25" by 4.5" by 2.5" NO SEAL PVC Form
18" by 10" by 2.5" NO SEAL PVC Form
18" by 14" by 2.5" NO SEAL PVC Form
24" by 12" by 2.5" NO SEAL PVC Form
36" by 18" by 2.5" NO SEAL PVC Form
48" by 24" by 2.5" NO SEAL PVC Form
WARRANTY POLICY:
Please unscrew and tap your cured project to get it out of the form by gently hitting the inside of the sides and flipping over and hitting the bottom. Using excessive force inside on the sides and using a metal hammer will void any warranty.
Please read carefully instructions on how to mix and pour your Epoxy.
Epoxy that does not cure properly will make it impossible to remove your project.
Epoxy that over heats during the curing process will twist and crack the Form, sometimes adhering to the form. Again making it very difficult to remove your project for the form.
If any of these events are to happen warranty will be voided.
MATRIAL: PVC
SEAL: SILICONE
These will need resealed with Silicone after each use
Our Epoxy/Resin forms are a great investment for any shop or hobbyist looking to save time.
Sizes Available:
15" by 5" by 2.5" NO SEAL PVC Form
25" by 4.5" by 2.5" NO SEAL PVC Form
18" by 10" by 2.5" NO SEAL PVC Form
18" by 14" by 2.5" NO SEAL PVC Form
24" by 12" by 2.5" NO SEAL PVC Form
36" by 18" by 2.5" NO SEAL PVC Form
48" by 24" by 2.5" NO SEAL PVC Form
WARRANTY POLICY:
Please unscrew and tap your cured project to get it out of the form by gently hitting the inside of the sides and flipping over and hitting the bottom. Using excessive force inside on the sides and using a metal hammer will void any warranty.
Please read carefully instructions on how to mix and pour your Epoxy.
Epoxy that does not cure properly will make it impossible to remove your project.
Epoxy that over heats during the curing process will twist and crack the Form, sometimes adhering to the form. Again making it very difficult to remove your project for the form.
If any of these events are to happen warranty will be voided.
Stumps Resin Molds are quick & easy & already setup for the first pour!
MATRIAL: PVC
SEAL: SILICONE
These will need resealed with Silicone after each use
Our Epoxy/Resin forms are a great investment for any shop or hobbyist looking to save time.
Sizes Available:
15" by 5" by 2.5" NO SEAL PVC Form
25" by 4.5" by 2.5" NO SEAL PVC Form
18" by 10" by 2.5" NO SEAL PVC Form
18" by 14" by 2.5" NO SEAL PVC Form
24" by 12" by 2.5" NO SEAL PVC Form
36" by 18" by 2.5" NO SEAL PVC Form
48" by 24" by 2.5" NO SEAL PVC Form
WARRANTY POLICY:
Please unscrew and tap your cured project to get it out of the form by gently hitting the inside of the sides and flipping over and hitting the bottom. Using excessive force inside on the sides and using a metal hammer will void any warranty.
Please read carefully instructions on how to mix and pour your Epoxy.
Epoxy that does not cure properly will make it impossible to remove your project.
Epoxy that over heats during the curing process will twist and crack the Form, sometimes adhering to the form. Again making it very difficult to remove your project for the form.
If any of these events are to happen warranty will be voided.
MATRIAL: PVC
SEAL: SILICONE
These will need resealed with Silicone after each use
Our Epoxy/Resin forms are a great investment for any shop or hobbyist looking to save time.
Sizes Available:
15" by 5" by 2.5" NO SEAL PVC Form
25" by 4.5" by 2.5" NO SEAL PVC Form
18" by 10" by 2.5" NO SEAL PVC Form
18" by 14" by 2.5" NO SEAL PVC Form
24" by 12" by 2.5" NO SEAL PVC Form
36" by 18" by 2.5" NO SEAL PVC Form
48" by 24" by 2.5" NO SEAL PVC Form
WARRANTY POLICY:
Please unscrew and tap your cured project to get it out of the form by gently hitting the inside of the sides and flipping over and hitting the bottom. Using excessive force inside on the sides and using a metal hammer will void any warranty.
Please read carefully instructions on how to mix and pour your Epoxy.
Epoxy that does not cure properly will make it impossible to remove your project.
Epoxy that over heats during the curing process will twist and crack the Form, sometimes adhering to the form. Again making it very difficult to remove your project for the form.
If any of these events are to happen warranty will be voided.
